 |
 |
 |
|
| 3CR990B-FXLP-97 3Com 10/100 Secure Fiber-FX NIC, Low Profile |
|
|
|
|
|
 |
|
 |
|
Features
- Media: 100BASE-FX
- Connector: SC
- Bus: 32-bit, 33 MHz PCI
- Cabling: Long-wavelength fiber-optic cable (1300 nm), 50 µ/125 µ or 62.5 µ/125 µ multimode fiber
- Operating distance: Full-duplex up to 2,000 m (6,560 ft), half-duplex up to 412 m (1,351 ft)
- Onboard processor: ARM9 security processor, 100 MHz RISC
- Security offloads: 168-bit 3DES, 56-bit DES, SHA-1, MD5, RFC 2402; up to 75 security associations
- Other offloads: TCP segmentation, TCP/UDP/IP checksum
- Network protocols: TCP/IP, ISO 8802-3
- Standards compliance: PC 99, WfM 1.1a/2.0, ACPI 1.0, DMI, PXE 2.0, RIS, IEEE 802.3, PCI 2.2, FIPS 140-2 (pending)
- Drivers: Linux 2.4/Red Hat 7.3-9.0; Microsoft Windows 2003 Server, 2000, XP, NT 4.0; Novell NetWare 5.x, 6.x
- Management: SNMP manageable; 3Com Managed PC Boot Agent
- Safety, electromagnetic compatibility: Meets FCC requirements, FCC B, CE, C Tick
- Dimensions: length, 13.34 cm (5.25 in); width, 6.35cm (2.50 in)
- Power: +5V +/- 5% @ 1.26 A max.
- Temperature: 0o to 70o C (32o to 158o F) operating, -30o to 90o C (-22o to 194o F) storage
- Humidity: 10% to 90% noncondensing, operating/storage
- System Requirements
- PCI-2.2 compliant systems
- 5 V or 3.3 V signaling environments
- Fiber-optic cabling and switching
- Package Contents
- Low-profile NIC
- Installation CD-ROM
- Please Note
- Windows 2003 Server, 2000, or XP operating system required for offload capabilities.
- Windows 2003 Server or XP operating system required for TCP segmentation.
- Remote wake up operates in systems from standby mode only; it is not supported in shutdown or sleep modes
|
|
|
 |
|
 |
|
|
|
